Restoring A Test Record From Flash Eeprom - Vanguard Instruments CVT-765 User Manual

REV 1 CVT-765 USER'S MANUAL

3.6.3. Restoring a Test Record From Flash EEPROM

Use the steps below to restore a test record from the CVT-765's Flash EEPROM to the working
memory:
a. Start from the "START-UP" menu:
1. TEST TRANSFORMER
2. SETUP
TIME: 15:16:17
DATE: 05/17/11
[2]
Press the key (SETUP).
b. The following screen will be displayed:
1. RECORD ID
2. SET 50/60 HZ
3. DISPLAY RECORD
4. SAVE/RESTORE RECORD
5. SET TIME
6. set language
[4]
Press the key (SAVE/RESTORE RECORD).
c. The following screen will be displayed:
1. RESTORE RECORD
2. SAVE RECORD
3. RECORD DIRECTORY
4. ERASE RECORD
5. COPY to THUMB DRIVE
Option 5 (COPY TO THUMB DRIVE) will be listed only if a USB Flash drive is
connected to the CVT-765.
NOTE
[1]
Press the key (RESTORE RECORD).
24