Setting The Date And Time - Vanguard Instruments CVT-765 User Manual

REV 1 CVT-765 USER'S MANUAL
3.2

Setting the Date and Time

To set the date and time:
a. Start from the "START-UP" menu:
1. TEST TRANSFORMER
2. SETUP
TIME: 15:16:17
DATE: 05/17/11
[2]
Press the key (SETUP).
b. The following screen will be displayed:
1. RECORD ID
2. SET 50/60 HZ
3. DISPLAY RECORD
4. SAVE/RESTORE RECORD
5. SET TIME
6. set language
[5]
Press the key (SET TIME).
c. The following screen will be displayed:
ENTER DATE
MM-DD-YY
Enter the date using the alpha-numeric keypad.
d. The following screen will be displayed:
ENTER TIME
HH:MM:SS
Enter the current time using the alpha-numeric keypad. When the complete time has
been entered, you will be immediately returned to the "START-UP" menu.
8