Table of Contents
Advertisement
3.5
Performing Tests
3.5.1. Entering Test Record Header Information
You can enter the test record header information before performing tests. The record header
includes identifying information such as the company, station, circuit, manufacturer, etc. Once
the header information has been set, it will apply to all subsequent test records. To enter the
header information:
a. Start from the "START-UP" menu:
1. TEST TRANSFORMER
2. SETUP
TIME:
15:16:17
DATE:
05/17/11
[2]
Press the
key (SETUP).
b. The following screen will be displayed:
1. RECORD ID
2. SET 50/60 HZ
3. DISPLAY RECORD
4. SAVE/RESTORE RECORD
5. SET TIME
6. set language
[1]
Press the
key (RECORD ID).
c. The following screen will be displayed:
COMPANY:
_
↑
↓
/
TO POSITION
"ENTER" TO ACCEPT
Type the company name using the alpha-numeric keypad.
When pressing a key, the corresponding number on the key will be displayed first.
Pressing the key again will display the first letter on the key. Pressing the key again will
display the second letter on the key. For example, to type the letter "A", you must press
[2]
the
key twice. To erase the character at the cursor position, press the
[Contrast ∧]
Press the
key to move to the next character. Press the
CVT-765 USER'S MANUAL
[CLEAR]
[Contrast ∨]
REV 1
key.
11
Advertisement
Table of Contents
