Setting The Interface Language - Vanguard Instruments CVT-765 User Manual

3.3

Setting the Interface Language

Follow the steps below to set the interface language (English, Spanish, or Turkish):
a. Start from the "START-UP" menu:
1. TEST TRANSFORMER
2. SETUP
TIME: 15:16:17
DATE: 05/17/11
[2]
Press the key (SETUP)
b. The following screen will be displayed:
1. RECORD ID
2. SET 50/60 HZ
3. DISPLAY RECORD
4. SAVE/RESTORE RECORD
5. SET TIME
6. set language
[6]
Press the key (SET LANGUAGE)
c. The following screen will be displayed:
1. ENGLISH
2. TURKISH
3. SPANISH
Select the preferred interface language by pressing the corresponding key on the
[1] [2]
keypad ( ,
will be displayed as shown below:
ENGLISH SET
Press any key to return to the "START-UP" menu.
[3]
, or ). The interface language will be set and a confirmation screen
CVT-765 USER'S MANUAL REV 1
9