Setting The Frequency (50 Or 60 Hz) - Vanguard Instruments CVT-765 User Manual

REV 1 CVT-765 USER'S MANUAL
3.4

Setting the Frequency (50 or 60 Hz)

Follow the steps below to set the preferred frequency:
a. Start from the "START-UP" menu:
1. TEST TRANSFORMER
2. SETUP
TIME: 15:16:17
DATE: 05/17/11
[2]
Press the key (SETUP).
b. The following screen will be displayed:
1. RECORD ID
2. SET 50/60 HZ
3. DISPLAY RECORD
4. SAVE/RESTORE RECORD
5. SET TIME
6. set language
[2]
Press the key (SET 50/60 HZ).
c. The following screen will be displayed:
1. 60 Hz
2. 50 hz
Select the preferred frequency by pressing the corresponding key on the keypad (
[2]
). The frequency will be set and a confirmation screen will be displayed as shown
below:
60 hz set
Press any key to return to the "START-UP" menu.
10
[1]
or