Table of Contents
Advertisement
Balance Setup Screen
After setting up your balance measuring equipment and marking your
tachometer reference point, the next step is to configure balancing measurement
parameters for the balancing run sequence.
Follow these steps to setup the Balancing parameters.
1. From the Balance main menu, select Setup and press Enter.
The Balance Setup lets you configure the balance measurement
parameters.
2. Select an option and press the Right arrow to open a list choices.
3. Use the arrow keys to select a parameter.
4. Press the Left arrow to save your selection.
Use the descriptions in
configure the parameters in the Balance Setup screen.
5. Save the setup or start taking the balancing measurement.
Rockwell Automation Publication 1441-UM004A-EN-P - May 2011
Balancing Extension Module
Balance Extension Module Parameters
Chapter 2
to help you
21
Advertisement
Table of Contents
