Dialing Options; Hang Up Line; Dial Number; Redial Last Number - ADTRAN ISU 512 User Manual

Adtran isdn service unit user manual isu 512
Hide thumbs Also See for ISU 512:
Table of Contents

Advertisement

Chapter 5: Configuration

DIALING OPTIONS

Selecting 4=DIAL or pressing the # (pound) from the top of the menu tree dis-
plays the available dialing options. (See Figure 5-3.) Use the following menu
path to set dialing options:
4=Dial

Hang Up Line

Terminates current call.

Dial Number

Allows a number to be entered and dialed from the key pad. If an error is
made while entering a number, press Cancel to erase and reenter the number.
Press Cancel twice consecutively to exit without dialing a number. Press En-
ter after entering a number to dial the number and save the dialed number as
stored number 9 for redialing purposes.

Redial Last Number

Allows redial of the last number called or attempted. This number was saved
as stored number 9 from the last attempted phone call.

Answer Call

Allows selective answer of incoming calls when the Auto Answer is config-
ured for disable. Auto Answer is described in Auto Answer in this chapter.

Dial Stored Number

Allows the dialing of one of ten stored phone numbers. Upon entering this
menu, the Up and Down arrows permit viewing and selection of a stored
number. Press Enter to dial the number. A copy of that number is saved as
stored number 9 (SN9) for redial purposes.
54
1=Hang up line
2=Dial number
3=Redial last #
4=Answer Call
5=Dial stored #
6=Store/Review #
ISU 512 User Manual
61202.086L1-1

Advertisement

Table of Contents
loading

Table of Contents