Table of Contents
Advertisement
Appendix A. Status Buffer Messages
NORMAL_CLEARING
The network is disconnecting the current call.
NOT end2end ISDN
The path that the call was routed over is not ISDN from end-to-end (warning
only).
NUMBER_CHANGED
The number dialed has been changed.
OUTGOING_CALL_BA
The network will not allow the outgoing call to be placed.
PRE-EMPTED
The network pre-empted the call.
PROTOCOL_ERROR
Call control error.
REQ_CHANNEL_NOT_
The channel type requested is currently not available.
Remote not ISU
Bonding negotiation determined the far-end unit is not another ISU 512.
RESP_TO_STAT_ENQ
Response to status enquiry.
Ring 1/2
An incoming call on either the first or second channel entered the Ring state.
The calling phone number is displayed if available.
S cmd not = or ?
User did not use proper syntax in the command string.
SERVICE_NOT_AVAIL
The service requested by the user is not available.
SOURCE NOT ISDN
The incoming calling party is not ISDN (warning only).
SReg SetError
Local DTE invalid S-register setting.
76
ISU 512 User Manual
61202.086L1-1
Advertisement
Table of Contents
