ITOH DENKI POWER MOLLER IB-P03 Technical Documentation Manual page 30

10. g
lossary
Term
IB-P03 (IB)
iCEP
Ladder logic
Slave
Master
JOG operation
Direction
Zone
Upstream
Downstream
Tray
JAM timer
JAM error
Sensor timer
Sensor timer error
RUN hold timer
Sensor-ON delay timer
LD Recorder
MDR
IB-P03
T
echnical documenTaTion
A slave device for Profinet made by ITOH DENKI, and the device is to input and
output data such as for motor drive or sensor input.
ITOH DENKI's PC application for creating a ladder program and setting
parameters.
iCEP stands for itoh Configurator for Ethernet/IP and Profinet.
A program (ladder logic) to define the operation of each motor of IBs.
Program can be created by ITOH DENKI's PC application, "iCEP".
A device that operates under instructions from the master device
A device that issues instructions to the slave devices
Forcible operation in motor. Set with iCEP.
The operation of ladder logic stops during JOG operation.
Indicates the rotation direction of a motor.
Indicates the transfer zone managed by a motor.
Indicates the upstream zone (carry-in zone).
Indicates the downstream zone (carry-out zone).
Indicates a product to be transferred on the conveyor.
A timer that starts when the sensor of its own zone becomes ON and stops when
the sensor becomes OFF in a ZPA transfer (It detects transfer congestion in the
zone.)
An error that occurs when the JAM timer counts up in response to the passage
of the set time.
A timer that starts when the upstream sensor changes from ON to OFF and
stops when the sensor of its own zone changes from OFF to ON in a ZPA
transfer (It detects a loss of tray.)
An error that occurs at the moment the sensor timer counts up.
A timer that specifies the period of time for turning the motor continuously in its
own zone after the sensor of its own zone becomes OFF in a ZPA transfer
A timer to set the period of time for stopping delay after a tray reaches to own
zone (own sensor) in ZPA transfer.
ITOH DENKI's PC application to analyze a ladder program
Up to two ladder program logs can be recorded simultaneously.
Motorized roller
30
Description
Original notice - T1.10