Balance" Remains On The Status Line; No Analog Output; No Serial Output - GE OptiSonde User Manual

"Balance" Remains on the
Status Line

No Analog Output

No Serial Output

Maintenance
Check that the sensor and sensor cable are connected. If necessary,
connect them, and the unit will complete the PACER cycle after a
short time (5 to 15 minutes).
The sensor bridge may be out of balance (refer to page 5-1).
If there is no analog output, but the digital display indicates correctly,
check the analog output scaling.
Check the serial port programming for proper settings.
October 2007
5-9