GE OptiSonde User Manual page 52

October 2007
Logging Parameters
Setting
Status Select whether to start or stop transmitting
data.
Select Select logging on PC or SD (secure data) card
Manage Handle individual logs.
(Internal or File
logs only)
Units Set up to eight units to log.
Enter the output interval in seconds (for Serial
Interval
Mode: All).
Format Choose the output format.
Choose the separator to be used between
Field
parameters.
Separator
Flags Enable logging of status (Control, PACER,
Flooded, etc.) and alarm state (Alarm/-------)
4-8
Table 4-5: Logging Parameter Options
Description Available Options
Start (start new or currently running
log), Stop (stop currently running log),
Close (stop and complete log; once
closed, the log cannot be reopened).
File (log on internal SD card), Comm (log
on PC)
Details (displays file name, interval and
size), Transfer (transfer closed log to PC),
New Log (set up new log),
Erase (delete log from OptiSonde)
See Table 4-2 on page 4-3.
Enter a number (up to 86400).
X=#.#, #.#(), #.#
CR-LF, Comma, Tab
On, Off
Programming the OptiSonde