Table of Contents
Advertisement
KP100G
Communication settings
Communication Settings
Protocol:TYPE1
Node No:1
Baud rate:19200bps
Protocol: "TYPE1" or "TYPE2", to select protocol of communication
To communicate by OMRON protocol, select TYPE1.
Node No.: Node number setting of the inverter. Only valid whenTYPE1 protocol is selected
Baud rate: Baud rate setting of communication. Only valid when TYPE1 protocol is selected
Baud rate is 9600bps or 19200bps. Default value is 19200bps.
Data Logger Function Guideline
Function Tree
Initial Screen
1st Layer
Welcome
After 5
seconds
2nd Layer
Channel selection
Channel selection
Text display
Channel selection
Channel selection
Staus:Normal
1. The display is shown from first data of a day
Daily graph
2. Up to 12 hours can be displayed
3. Select date by using
1. The display is shown from first data of a week, Sunday
Weekly graph
2. 7days on one display
3. Select week by using
1. The latest 2 errors for the past are shown
Error History
2. Older errors than those errors are displayed
by using
System Display
SN:
System Display
Version:
Memory:
Date Day
Time Time Zones
Audible Alarm
Language
Communication Setting
Communication
Protocol setting
Setting
Node NO. setting
Baudrate selection
1. Select channel by
2. Press "OK" to change
3. Select parameter by using
4. Press "OK" to confirm and back
Date Time
1. Use
to select item
2. Press "OK" to set
3. Use
to change number
4. Use
to move cursor
5. Press "OK" again to confirm
1. Use
to select item
2. Press "OK" to set
3. Use
to change number
4. Use
to move cursor
5. Press "OK" again to confirm
37
Advertisement
Table of Contents
