Table of Contents
Advertisement
KP100G
Weekly graph
By pressing up " " key from previous at any time, the weekly display shows. The principles are:
Time-axis: 7 days from Sunday of a week. The left most point is the data of Sunday.
Accumulated kWh (Y-axis): The amount is kWh of that day. From 0 to 100kWh
Week change: By pressing " " and " ", user can switch the week he interested. The corresponding dates on the upper-right corner has to be
changed as well.
Error history
In this screen, inverter shows the latest 2 errors for the past as below. By pressing " " and " ", error history scrolls and user can see previous errors.
E r r o r H i s t o r y
E 5 6 5 : E 1 - A
@ 0 5 / 1 0 / 0 7 1 4 : 2 2
V a l u e = 0 . 0 . 0
E 5 6 6 : E 1 - 0
@ 0 5 / 1 0 / 0 7 1 4 : 2 4
V a l u e = N / A
System display
S y s t e m D i s p l a y
S N : S V 1 0 0 0 0 - 0 1
V e r s i o n : 0 0 . 2 1 - 0 0 . 0 4
M e m o r y : 1 . 7 %
D a t e : 1 2 / 1 3 / 0 6 W e d
T i m e : 1 6 : 1 5 : 0 5 G M T + 0 8
A U D I O A L A R M : O N
L A N G U A G E : E N G
SN: the serial number of the inverter
Version: the firmware version of the inverter
Memory: the used percentage of total capacity
Date: The date setting in the RTC (Real Time Clock) Day: The day of the week
Time: The time setting in the RTC
Audible Alarm: "ON" or "OFF", the status of the setting
Language: The current setting of display language
To change the setting, press " ". A cursor appears on item to be set. By using " " and " ", user can move the cursor to where he interested. Press
"OK" on the item to change the setting, use " " and " " to change the number, press "OK" again to confirm.
Time Zones: Setting in GMT
36
Advertisement
Table of Contents
