Table of Contents
Advertisement
KP100G
7. Display
KP100G shows the status, measured values, graphs of generated power, etc. on LCD (Data Logger).
Using the LCD (Data Logger)
Operation
Keys
. " ": To lower layer (1st to 2nd) or moving cursor right
. " " : To higher layer (2nd to 1st) or moving cursor left
. " " : To change back previous screen or moving cursor up
. " " : To change to next screen or moving cursor down
. "OK" : To set or confirm
Backlight
The backlight of LCD will be lighted up whenever any key is pressed. To save the power, inverter should continue the lighting for 3 Minutes after the
last activity. But whenever a "failure error" occurs, the backlight in red continues switch on and off alternatively every 1 second.
Audible Alarm
The alarm beeps when
1. Inverter failure
2. Memory is less than 5%
3. Fan Lock
This alarm can be "off" by setting. The default value is "On".
Insufficient memory warning
When the storage capacity reaches 95%, the inverter must notice the information to user by display and audible alarm.
In case the user continues ignoring the message and the memory is full, the earliest data will be overwritten by latest data.
33
Advertisement
Table of Contents
