Page 1
E024U Solar Kit FAAC International Inc. West Coast Operations Headquarter & East Coast Operations 357 South Acacia Avenue 3160 Murrell Rd Unit 357 Rockledge, FL 32955 Fullerton, CA 92831 Tel. 800 221 8278 www.faacusa.com...
DESCRIPTION AND CHARACTERISTICS TECHNICAL SPECIFICATIONS 3352.1 3353.1 This solar kit allows to use the E024U control board with the power. generated by a solar panel. Thanks to the high per- Nominal system voltage 24 Vdc formance built in solar charger/controller the battery can be...
Page 3
WIRING As soon as the batteries are connected the solar control- ler will start a self checking procedure, the battery status LED will blink in sequence and stop at the corresponding Connect the supplied cable with MC4 connectors to the charge level solar panel terminal block, make sure to follow the draw- ing below for the proper polarity...
SOLAR CONTROLLER LED INDICATION Battery Status LEDs (Fig 2 Ref (5) ) Error Indications • High Voltage Disconnect R - G Sequencing STATUS LED • High Temperature Disconnect R - Y Sequencing The Status LED (Fig. 2 ref. (1) ) indicates charging status and any existing solar input error conditions.
Page 5
BATTERY SOLAR PANEL S O L A R C O N T R O L L E R SS-10L CHARGING STATUS BATTERY STATUS Nominal Rating SOLAR BATTERY LOAD Remove SEALED 24 Volts dc Jumper Wir e for Solar In 10A 24 V FLOODED Flooded...
FAAC International, Inc.’s written consent, outside of FAAC International, Inc.’s workshop, or altered in any way so as, in the judgment of FAAC Interna- tional, Inc., to affect adversely the stability or reliability of the product(s) or has been subject to misuse, negligence, or accident, or has not been operated in accordance with FAAC International, Inc.’s or FAAC S.p.A.’s instructions or has been...