Maintenance - SMC Networks IBV1 Series Operation Manual

4. Do not use the product in a place where static electricity is a problem. It may result in the system
failure and trouble.
5. Do not use the product in a place where spatter can splash or get inside the product. Spattering
may result in a fire hazard.
6. Do not use in an environment where the product is directly exposed to cutting oil, lubricant oil or
coolant liquid, etc.
Consult with SMC if using in such an environment.
Caution
1. Please check the following points in the regular maintenance, and replace the parts as necessary.
a) Scratches, damage, wear, or corrosion
b) Air leakage
c) Squeezing or twisting of the tubing that is connected
d) Hardening, deterioration or softening of the tubing that is connected
e) Loosening of the nozzle
2. Before removing the product, stop the supply pressure and exhaust compressed air in the piping.
3. Do not modify or reconstruct the product.
Warning
Air blow pressure is high. Pay attention to the following for use.
1. Make sure that the person and workpiece are safe from the objects scattered by the blowing
pressure or by the air blow.
2. Be sure to wear safety goggles to protect the eyes from splashed substances.
3. Be careful with air blow sound.
4. Do not use this product to the human body. It may cause injury to personnel.
5. This product is not intended for amusement applications. Do not use the product as an air gun,
etc.
6. To prevent lurching of the nozzle due to air pressure, confirm that the nozzle is not loosened or
rattling by pulling on it by hand before operation.
7. Do not use the product to clean or remove toxic substances or chemicals.
8. Do not drop, step on or hit the product. This may cause damage.
9. If product is to be used in a public place, ensure product is not directed at people or used in a
manner that could adversely affect the environment.
10 . . . . For other cautions, refer to the 2 Port Solenoid Valves for Fluid Control Precautions.
11. Pressurizing the air blow discharge port may result in the breakage of the product.

Maintenance

Handling
10