Instrument Cluster - BMW R 1200RT 2016 Rider's Manual

the position it was in before the
ignition was switched off.
Press button 1 at top to raise
windshield.
Press button 1 at bottom to
lower windshield.
Switch off ignition.
The windscreen automatically
moves to the bottom limit posi-
tion.
If the windscreen encounters
resistance before it reaches
its limit position the pressure-
sensitive finger guard system
goes active. The windscreen
is stopped and raised slightly.
After a delay of a few seconds
the windscreen again attempts
to move to the bottom limit
position.
There is no guarantee that the
pressure-sensitive finger guard
system will function correctly if a
windscreen that does not have
BMW Motorrad approval is in-
stalled.
Under these circumstances:
Before switching off the igni-
tion always check that there is
nothing to obstruct movement
of the windscreen.

Instrument cluster

Adjusting the instrument
cluster
NOTICE
The instrument cluster may only
be adjusted when the motorcycle
is stationary.
Move instrument cluster 1 to
desired position by pressing
firmly on the top or bottom
edge. When doing so, make
sure to press in the center so
as to ensure the adjustment is
even.
5
83
z