BMW R 1200RT 2016 Rider's Manual page 136

8
ATTENTION
Tightening of screwed con-
134
nections with incorrect tight-
ening torque
Damage or loosening of screwed
connections
Always have the tightening
torques checked by a spe-
cialized workshop, preferably
an authorized BMW Motorrad
retailer.
z
Mount spacing bushing 1 on
left side in wheel hub.
ATTENTION
Front wheel installation op-
posite the running direction
Accident hazard
Observe running direction ar-
rows on tire or rim.
Roll front wheel into front
suspension.
Lift front wheel and install
quick-release axle 1.
Remove front wheel stand and
firmly compress front forks. Do
not actuate handbrake lever at
the same time.
Mounting front wheel stand
( 119).
Install screw 1 with specified
torque. Brace quick-release
axle on the right side at the
same time.
Quick-release axle in
telescopic fork
22 lb/ft (30 Nm)
Tighten left axle clamping
screw 2 with appropriate
torque.