BMW R 1200RT 2016 Rider's Manual page 137

Clamping screw for
quick-release axle in
telescopic fork
14 lb/ft (19 Nm)
Tighten the right-hand axle
clamping screw 1 with the
specified torque.
Clamping screw for
quick-release axle in
telescopic fork
14 lb/ft (19 Nm)
Remove front wheel stand.
Slide the brake calipers on the
left-hand and right-had side
onto the brake rotors.
Install securing screws 4 on left
and right with specified torque.
Brake caliper on tele-
scopic forks
28 lb/ft (38 Nm)
Remove adhesive tape from
wheel rim.
WARNING
Brake pads do not contact
the brake disc
Risk of accident due to delayed
braking effect.
Before driving off, check that
the braking effect kicks in with-
out any delay.
Engage the brakes repeatedly,
continuing until the brake pads
seat against the rotors.
Fix ABS sensor lead in retain-
ing clips 1 and 2.
Insert ABS sensor into socket
and fit screw 3.
Wheel speed sensor on
fork
Joint compound: Micro-
encapsulated or medium-
strength screw lock
6 lb/ft (8 Nm)
Remove rear wheel
Swing muffler outward
( 129).
8
135
z