BMW R 1200RT 2016 Rider's Manual page 70

4
68
You can cancel an activated
alarm at any time by pressing
button 2 on the remote key
z
or radio-operated key without
deactivating the DWA.
If an alarm was triggered while
the motorcycle was unattended,
the rider is notified accordingly
by an alarm tone sounding once
when the ignition is switched on.
The DWA (alarm system) LED
then indicates the reason for the
alarm signal for one minute.
Light signals on DWA LED:
1 flash: Motion sensor 1
2 flashes: Motion sensor 2
3 flashes: Ignition switched on
with unauthorized motorcycle
key
4 flashes: DWA disconnected
from motorcycle battery
5 flashes: motion sensor 3
Deactivation
with anti-theft alarm system
OE
(DWA)
Emergency on/off switch (kill
switch) in normal operating po-
sition.
Switch on the ignition.
Turn indicators light up once.
Confirmation tone sounds once
(if programmed).
Alarm system is deactivated.
DWA Adapting
with anti-theft alarm system
OE
(DWA)
Settings
Call up the
Vehicle
menu and select
Alarm syst.
.
The following settings are avail-
able:
Automatic On
-
theft alarm system is activated
automatically after the ignition
is switched off.
Automatic Off
-
anti-theft alarm system has
to be activated with the re-
-
: the anti-
: the