BMW R 1200RT 2016 Rider's Manual page 138

8
136
Shift into first gear.
Remove bolts 1 of rear wheel,
holding wheel as you do so.
Roll rear wheel out toward rear.
z
Installing rear wheel
WARNING
Use of a wheel which does
not comply with series speci-
fications
Malfunctions during control inter-
ventions by ABS and ASC
Please see the information on
the effect of wheel sizes on the
ABS and ASC chassis control
systems at the beginning of
this chapter.
ATTENTION
Tightening of screwed con-
nections with incorrect tight-
ening torque
Damage or loosening of screwed
connections
Always have the tightening
torques checked by a spe-
cialized workshop, preferably
an authorized BMW Motorrad
retailer.
Place rear wheel on rear wheel
support.
Install wheel studs 1 with spec-
ified torque.
Tighten rear wheel on
wheel flange
Tightening sequence: tighten
diagonally
44 lb/ft (60 Nm)
Mounting muffler ( 130).