BMW R 1200RT 2016 Rider's Manual page 38

Possible cause:
3
ABS self-diagnosis rou-
tine not completed
36
ABS is not available, as the
self-diagnosis routine was not
completed. (The motorcycle
must reach a specified mini-
mum speed before the system
can check operation of the
wheel speed sensors: 3 mph
z
(5 km/h))
Ride off slowly. It must be
noted that the ABS function
is not available until the self-
diagnosis has been completed.
ABS error
lights up.
Possible cause:
The ABS control unit has de-
tected an error. The ABS func-
tion is not available.
It is possible to continue riding
the motorcycle if you make
allowance for the ABS failure.
You should also take account
of the additional information on
situations that can lead to an
ABS fault ( 107).
Have the malfunction corrected
as soon as possible at an au-
thorized workshop, preferably
an authorized BMW Motorrad
retailer.
ASC intervention
flashes rapidly.
ASC has detected insta-
bility at the rear wheel and re-
sponded by reducing the torque.
The indicator and warning light
flashes longer than the ASC in-
tervention lasts. This feature
continues to furnish the rider
with visual feedback confirm-
ing that the system has initiated
active closed-loop intervention
even after the critical situation
has passed.
ASC self-diagnosis not
completed
flashes slowly.
Possible cause:
ASC self-diagnosis rou-
tine not completed
ASC is not available because
the self-diagnosis routine was
not completed. (The motor-
cycle must reach a specified
minimum speed before the
system can check operation of
the wheel sensors: min 3 mph
(min 5 km/h))
Ride off slowly. It must be
noted that the ASC function
is not available until the self-
diagnosis has been completed.