BMW R 1200RT 2016 Rider's Manual page 140

8
138
Insert bulb 2, ensuring that the
lug is in the correct position.
NOTICE
z
The alignment of the bulb may
differ from the illustration.
Locate wire spring 1 in the
catch.
Connect connector 1.
Place cap 1 in position and fix
by turning it clockwise.
Replacing high-beam
headlight light source
NOTICE
The description below steps you
through the procedure for replac-
ing the left bulb. Replacement is
carried out in the same way on
the right side.
Make sure ground is level and
firm and park motorcycle.
Switch off ignition.
Remove screws 2.
Remove speaker cover 1 side-
ways to the left.