Cloth Waste Box; Looper Cover; Spool Stand - Texi Tegra 4 User Manual

EN

CLOTH WASTE BOX

During the sewing with edge knife you can
use lint tray (cloth waste box).
Insert the hasp on the cloth waste box into
the groove on the looper cover.

LOOPER COVER

1.
Push the looper cover to the right
until it is stuck.
2. Open the looper cover in the
direction of the arrow.
Note: For safety, please turn off the
power before opening the looper
cover!

SPOOL STAND

78
Texi Tegra 4 INSTRUKCJA 2019.indb 78 Texi Tegra 4 INSTRUKCJA 2019.indb 78
Push the cloth waste box below,
until the above insert the hasp into
the groove on the looper cover.
Pull the spool stand before put the spool
holder on the spool pin.
Texi Tegra 4
18.09.2020 09:42 18.09.2020 09:42