Table of Contents
Advertisement
MODEL 6292
1. Functional Test
It is advisable to test all the items listed in the following table.
ITEM
USB Interface
Firmware Updating (BootLoader)
Rotary switch: (Turn right, turn left, pull)
Keyboard:
•
Test all switches
•
Check LEDs of CAPS LOCK and NUM LOCK Keys
Real Time Clock:
•
Adjust hour and date through menu
•
Check if clock is running (after some minutes)
LCD Backlight (try by menu)
LCD Contrast (try by menu)
Generation of 200A and resistance measurement
Grounding loop (Test using the auxiliary clamp in the two senses/ways )
Memory:
•
Save a test result
•
Recall a test saved
•
Erase the memory
Fan:
•
On mode
•
Auto mode
Check the high voltage detection on the output bornes (using 30V
Safety generation cutting by Overheating
Calibration
Power supply voltage and frequency (presented on main screen of calibration)
Serial number (check in System Info menu)
v1 - 03/15
SERVICE/CALIBRATION MANUAL
CHECKLIST
AC
- 3 -
)
CAT.# 2129.83
STATUS
Ok / Not Ok
Advertisement
Table of Contents
