IKA WiCo T25 Easy Clean Control Operating Instructions Manual page 8

:
LIMIT
Speed limit:
This symbol indicates upper/low speed limit set for the drive unit.
: PC control:
This symbol means that either the drive unit or the WiCo is connected to a
computer and the drive unit is being controlled from the computer. Then,
the buttons and rotary/push knob is no longer available except power
switch is pressed.
Program Control:
This symbol indicates that the WiCo is controlled by a program
(see "PROGRAMS").
Continuous mode:
This symbol indicates that the drive unit is in continuous mode and indi-
cates the direction of rotation of the drive unit.
Intermittent mode:
00:00
This symbol indicates that the drive unit is in intermittent mode.
8