Interface And Output; Maintenance And Cleaning - IKA WiCo T25 Easy Clean Control Operating Instructions Manual

Interface and output

See the operating instructions of the drive unit!
Connection capability: WiCo to the drive unit.
USB micro B
USB micro B
Connection capability: WiCo to a PC.
USB A
USB micro B
USB micro B
USB micro A
USB micro A
USB A

Maintenance and cleaning

The instrument is maintenance-free. It is only subject to the natural wear
and tear of components and their statistical failure rate.
Cleaning:
For cleaning disconnect the plug-in power supply!
Use only cleaning agents which have been approved by IKA to clean IKA
instruments.
Dirt Cleaning agent
Dyes isopropyl alcohol
Construction materials water containing tenside/isopropyl alcohol
Cosmetics water containing tenside/isopropyl alcohol
Foodstuffs water containing tenside
Fuels water containing tenside
For materials which are not listed, please request information from IKA
application support.
Wear protective gloves during cleaning the instruments.
Electrical instruments may not be placed in the cleansing agent for the pur-
pose of cleaning.
Do not allow moisture to get into the instrument when cleaning.
Before using another than the recommended method for cleaning or de-
contamination, the user must ascertain with IKA that this method does
not destroy the instrument.
Spare parts order:
When ordering spare parts, please give:
- machine type
- manufacturing number, see type plate
- item and designation of the spare part see www.ika.com, spare
parts diagram and spare parts list
- Software version.
18