GE FVP110 Maintenance Manual page 222

GE Energy
Relative Index Parameter
Index
7 8007 PV
8 8008 SP
9 8009 OUT
10 8010 PV_SCALE
11 8011 OUT_SCALE
12 8012 GRANT_DEN
Y
13 8013 CONTROL_O
PTS
14 8014 STATUS_OP
TS
15 8015 IN
16 8016 PV_FTIME
17 8017 BYPASS
18 8018 CAS_IN
19 8019 SP_RATE_D
N
20 8020 SP_RATE_U
P
21 8021 SP_HI_LIM
22 8022 SP_LO_LIM
23 8023 GAIN
Table 65 PID Block Parameters (Continued)
Default
Name (factory
setting)
—
—
—
0-100%
0-100%
0
0x0000
0x0000
0
0
1
0
+INF
+INF
100
0
1
FVP 110 Fieldbus Valve Positioner Manual
Write
— Indicates the primary analog value (or the
corresponding process value) used to execute
the specified actions, and the status of that
value.
Auto Setpoint of the block.
Man Value and status of output.
O/S Upper and lower scale limit values used for
scaling of the input (IN) value.
O/S Upper and lower scale limit values used for
scaling of the control output (OUT) value to the
values in the engineering unit.
Option to control access from the host
computer and local control panel to tuning and
alarm parameters.
O/S Defines block actions depending on block
status conditions.
O/S Defines options for control actions of block.
Controlled-value input.
Time constant (in seconds) of the first-order lag
filter applied to IN
Man Determines whether to bypass control
computation.
1 = off; do not bypass.
2 = on; bypass.
Cascade setpoint.
Rate-of-decrease limit for setpoint (SP)
Rate-of-increase limit for setpoint (SP)
Upper limit for setpoint (SP)
Lower limit for setpoint (SP)
Proportional gain (= 100 / proportional
band).
206
Description