Parameters Of Ao Block; Ao Block Parameters - GE FVP110 Maintenance Manual

GE Energy
Relative Index Parameter
Index
113 2113 SERVO_
TIME_TH
114 2114 SERVO_
WARN_
COUNT
115 2115 X_BST_ON_
THRESHOLD
116 2116 X_BST_OFF_
THRESHOLD
117 2117 X_BOOST_
VALUE

Parameters of AO Block

Relative Index Parameter
Index
0 5000 Block Header
1 5001 ST_REV
2 5002 TAG_DESC
3 5003 STRATEGY
Table 61 Transducer Block Parameters (Continued)
Default
Name (factory
setting)
10 sec
0
0, 0 %
0, 0 %
0, 0 % of MV
Table 62 AO Block Parameters
Default
Name (factory
setting)
0
Spaces
1
FVP 110 Fieldbus Valve Positioner Manual
Write
High-limit alarm setting for total time of Servo
Output Drift warning.
O/S Total number of times of Servo Output Drift
warning. To reset the count, write 0.
O/S The addition value to threshold for switching on
boost action; a control parameter for exhaust
[-10 to 10%]
Applicable for Double Acting Type
O/S The addition value to threshold for switching off
boost action; a control parameter for exhaust
[-10 to 10%]
Applicable for Double Acting Type
O/S The addition Boost value; a control parameter
for exhaust [-50 to 50%]
Applicable for Double Acting Type
Write
Block Tag Information about this block, including the
=O/S block tag, DD revision, execution time
— Incremented when a change is made to the
parameter settings for the AO block to indicate
the revision level of the settings, and used to
see whether there is a change in parameter
settings.
Universal parameter storing the description of
the tag
Universal parameter used by an upper-level
system to classify the function blocks
198
Description
Description