EXPLANATORY NOTES ON THE MAINTENANCE ACTIVITIES
Removal and installation
20. Apply locking compound to the attachment
bolts (3) of the brake calliper (2). See
"Technical data".
21. Install the brake calliper (2). Tighten the
attachment bolts (3) in the specified
sequence to the specified torque. See
"Technical data".
22. Set the brake pad clearance. To do this, turn
the adjusting bolt (1) anti-clockwise until the
brake pads abut the brake disc. Then turn
the adjusting bolt (1) clockwise through 90.
Check that the brake disc runs freely.
23. Fit the cap on the adjusting bolt (1).
24. Install the wheel speed sensor (1) and press
it against the sensor ring. The required
5
clearance will be produced while on the
move.
25. Fit the wheel.
4-14
https://www.truck-manuals.net/
1
3
1
ΛΦ45/55 series
2
3
R600559
S7 00 589
©
200515