DAF LF45 Maintenance Manual page 101

EXPLANATORY NOTES ON THE MAINTENANCE ACTIVITIES
ΛΦ45/55 series
Allison MD 3060 automatic gearbox
Removing the oil filters
1. Remove the attachment bolts from the filter
covers (2) and remove the filter covers.
Collect any oil that is flowing out.
2. Remove the oil filters from the oil sump.
3. Remove the various O-rings and the gasket
from the filter covers.
4. Remove any traces of gasket from the filter
covers and the contact surfaces.
Installing the oil filters
1. Lightly lubricate the new O-rings with clean
gearbox oil and fit the various O-rings to the
filter covers.
Note:
Compare the new O-rings to the old O-rings
to ensure that the correct O-rings are used.
2. Fit a new gasket to the filter covers.
3. Lightly lubricate the rubber inner ring of the
oil filters with clean gearbox oil and fit the oil
filters to the filter covers.
4. Fit the filter covers together with the oil filters
to the gearbox and tighten the attachment
bolts to the specified torque, see "Technical
data".
5. Check the oil level, see chapter "Inspection
and adjustment".
©
200515
https://www.truck-manuals.net/
Removal and installation
2
1
V300371
4-17
5