EXPLANATORY NOTES ON THE MAINTENANCE ACTIVITIES
Inspection and adjustment
10. If necessary, correct the brake pressure by
adjusting the length of the vertical
connecting rod (2). Never attempt to alter the
length L of the (horizontal) control lever.
11. Remove the ball coupling (1) and raise the
control lever. Check that the output pressure
is now allowed through (almost) without
reduction.
Note:
The small socket head screw in the centre of
the valve must not be adjusted.
Drive and chassis
5
3-22
https://www.truck-manuals.net/
ΛΦ45/55 series
1
2
R6 00 568
©
200515