EXPLANATORY NOTES ON THE MAINTENANCE ACTIVITIES
Removal and installation
6.
Remove the hub cap (11).
7.
Remove the lock nut (10).
8.
Remove the hub (5) from the axle journal (1).
Save the circlip (8) and the bearing cage (7).
9.
Remove the seal (2) from the hub (5).
10. Take the bearing cage (3) out of the hub (5).
Installing the hub
1.
Clean the axle journal (1) and check for
damage.
2.
Clean the bearing cages (3) and (7).
3.
Remove the grease from the hub (5) and
clean the ball races (4) and (6).
5
4.
Check the bearing cages (3) and (7) and the
ball races (4) and (6) for wear and damage.
If necessary, fit new wheel bearings.
5.
Apply an ample quantity of the specified
grease to the bearing cages (3) and (7).
6.
Fit the bearing cage (3) into the hub (5).
7.
Apply a layer of grease (approx. 6 mm thick)
to the hub cavity.
4-12
https://www.truck-manuals.net/
ΛΦ45/55 series
1
2
3
4
5
6
7
8
9
10
11
S7 00 573
S7 00 572
©
200515