DAF LF45 Maintenance Manual page 94

EXPLANATORY NOTES ON THE MAINTENANCE ACTIVITIES
Removal and installation
4.9 REMOVAL AND INSTALLATION, HIGH-PRESSURE FILTER OF THE RAS-EC
STEERING GEAR
{
Drained steering oil must not be re-
used. Store this hydraulic oil
separately from the other drained
oils and have the oil collected by a
waste-removal company authorised
to do so.
Removing the high-pressure filter
1. Clean the high-pressure filter and the
surrounding area.
2. Place a suitable receptacle under the high-
pressure filter and remove the filter cap (5).
3. Remove the filter element (4).
5
4. Clean the filter cap (5).
Installing the high-pressure filter
1. Check the sealing rings (2) and (3) and
replace them if necessary.
2. Fit a new filter element (4) in the filter
holder (1).
3. Fit the filter cap (5). Tighten the filter cap to
the specified tightening torque, see
"Technical data".
4. Top up the system, see chapter "Draining
and filling".
5. Check the operation of the system.
6. Check the high-pressure filter for leakage.
4-10
https://www.truck-manuals.net/
ΛΦ45/55 series
1
2
3
4
5
S7 00 688
©
200515