TECHNICAL DATA
Drive shafts, drive and chassis
3.2 TIGHTENING TORQUES
0
The tightening torques stated in this section are
different from the standard tightening torques
stated in the overview of the standard tightening
torques. The other threaded connections not
specified must therefore be tightened to the
torque stated in the overview of standard
tightening torques.
When attachment bolts and nuts are to be
replaced, it is important - unless stated otherwise -
that these bolts and nuts are of exactly the same
length and property class as the removed ones.
ZF S5-42 gearbox
Level check/filler
plug (2)
Drain plug (1)
ZF 6S-850 gearbox
Level check/filler
plug (1)
Drain plug (2)
3-2
50 Nm
50 Nm
50 Nm
60 Nm
https://www.truck-manuals.net/
1
2
ΛΦ45/55 series
2
V3 00 395
1
V3 00 884
©
200515