Steelcase kick Worksurface Manual

Download this manual

If you have a problem, question, or request,

call your local dealer, or Steelcase Line 1 at

888.STEELCASE (888.783.3522)

for immediate action by people who want to help you.

(Outside the U.S.A., Canada, Mexico, Puerto Rico,

and the U.S. Virgin Islands, call: 1.616.247.2500)

Or visit our website: www.steelcase.com

2012 Steelcase Inc.

Grand Rapids, MI 49501

U.S.A.

Printed in U.S.A.

page 4

page 5

page 6

kick

Worksurfaces

™

Page 1 of 6

939504841 Rev D

Need help?

Do you have a question about the kick Worksurface and is the answer not in the manual?

Page 1 5 page 6 If you have a problem, question, or request, call your local dealer, or Steelcase Line 1 at 888.STEELCASE (888.783.3522) for immediate action by people who want to help you. (Outside the U.S.A., Canada, Mexico, Puerto Rico, and the U.S.
Page 2 ® Mounting Worksurfaces Cantilever and Tie Strap See Cantilever Mark height of worksurfaces to 27 1/2". Attach Assembly Instruction 939504645 the support brackets to the vertical junctions. A minimum of 1 pilot hole per corner and side support bracket is provided. All other supports contain a minimum of 2 pilot holes.
Page 3 ® Attaching Adjoining Worksurfaces Lay worksurfaces on supports for the entire workstation cluster loosely securing each surface all available holes. to supports and adjust worksurfaces for optimal Place support plates as shown. Secure a screw in appearance. Secure screws starting with corner workstation.
Page 4 ® See page 2 for support information Page 4 of 6 939504841 Rev D...
Page 5 ® Post Leg Orientation See page 2 for support information Page 5 of 6 939504841 Rev D...
Page 6 ® See page 2 for support information Page 6 of 6 939504841 Rev D...