Download
Share
Print this page
Steelcase Secant Options Worksurface Supports Manual
  1. Manuals
  2. Brands
  3. Steelcase Manuals
  4. Indoor Furnishing
  5. Secant Options Worksurface Supports
  6. Manual
Steelcase Secant Options Worksurface Supports Manual

Steelcase Secant Options Worksurface Supports Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
R
Secant Options Worksurface Supports
®
#3 ACR3
Phillips Driver
#3 Square Drive Bit
Bit Holder
If you have a problem, question, or request, call
your local dealer, or Steelcase Line 1 at
888.STEELCASE (888.783.3522)
for immediate action by people who want to help you.
(Outside the U.S.A., Canada, Mexico, Puerto Rico,
and the U.S. Virgin Islands, call: 1.616.247.2500)
Or visit our website: www.steelcase.com
©
2000 Steelcase Inc.
Grand Rapids, MI 49501
U.S.A.
Page 1 of 38
Printed in U.S.A.
939504792 Rev D

Advertisement

loading
Need help?

Need help?

Do you have a question about the Secant Options Worksurface Supports and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Steelcase Secant Options Worksurface Supports

Summary of Contents for Steelcase Secant Options Worksurface Supports

  • Page 1 #3 Square Drive Bit Bit Holder If you have a problem, question, or request, call your local dealer, or Steelcase Line 1 at 888.STEELCASE (888.783.3522) for immediate action by people who want to help you. (Outside the U.S.A., Canada, Mexico, Puerto Rico, and the U.S.
  • Page 2 Secant Options Worksurface Supports-Parts List Maintenance-Adjustable Mounting Plate, Screw "A" or "Stealth Bracket" #3 Square Drive #12 Self-Drilling For Wood-Core Worksurface Tie Plate, or Tie Strap Screw "B" 1/4-20 Self-Tapping Fixed-Height Support For Metal Parts Bracket for Rear Supports #3 Square Drive...
  • Page 3 Fixed-Height Freestanding Systems Install extended rear glide assembly. Make sure that the upward bent flanges contact the back of the leg before securing the bolt. See note For and end-of-run application, attach one bracket to each support with four (4) "B" screws as shown. NOTE: Extended Spacer required for End Panel applications only.
  • Page 4 Fixed-Height Freestanding Systems (cont.) For a corner or a shared application, attach two (2) brackets to each support using four (4) "B" screws as shown. Rear Support Intermediate Support (or shared C-leg support) Page 4 of 38 939504792 Rev D...

  • Page 5: Top Surface

    Fixed-Height Freestanding Systems (cont.) Use the "10-4" rule when selecting stretchers: Attach one end of the stretcher to one completed The actual length of the support assembly with four (4) "B" screws, then stretcher is 10" shorter than attach opposite end of stretcher to adjacent the nominal (specified) length support assembly.
  • Page 6 Shared Condition Fixed-Height Freestanding Systems (cont.) Attach appropriate plates to intermediate and c-leg supports with two (2) "B" screws. End-of-Run Condition Page 6 of 38 939504792 Rev D...
  • Page 7 Fixed-Height Freestanding Systems (cont.) Align worksurface to support structure, fitting the support bracket tabs into the large-diameter holes of the worksurface. Align pilot holes in worksurfaces with mounting holes in support structure, and attach with "A" screws as shown. Bottom View of Worksurface NOTE: HOLES FOR SCREWS...
  • Page 8 Fixed-Height Freestanding Systems (cont.) a) Level the entire assembly by turning the glides on all of the supports. b) Snap plastic cover over rear glide assembly. c) Peel backing off double-sided tape to expose sticky surface. d) Press bottom of wire manager over plastic cover, then tip up into place.
  • Page 9 Conference Link And Conference Wing Assembly See pages 2 through 4. On a non-abrasive surface (such as a shipping blanket or carpeting) free of screws, tools, and other debris that may damage it, flip the worksurface over so its pilot holes are visible. Secure column support to conference link or conference wing by aligning mounting plate with pilot holes, and attaching with four (4) "A"...
  • Page 10 Conference Link And Conference Wing Assembly (cont.) Attach mounting plate to support and align worksurface to support structure, fitting the support bracket tabs into the large diameter holes of the worksurface. Align pilot holes in worksurface with mounting holes in support structure, and attach with screws as shown.
  • Page 11 End Cap Assembly Assemble support structure in shared position as shown. Attach one end of the stretcher to one completed support assembly with four (4) "B" screws Install the mounting plate using three (3) "B" screws C-Leg Support as shown. Page 11 of 38 939504792 Rev D...
  • Page 12 Bottom View of Worksurface ALTERNATE TIE HOLE FOR SUPPORT PLATE POSITION BRACKET TABS End Cap Assembly (cont.) TIE PLATE 1.0" Align worksurface to support structure, fitting the support bracket tabs into the large-diameter holes of the worksurface. Align pilot holes in worksurfaces with mounting holes in support structure, and attach with six (6) "A"...
  • Page 13 Spanner Assembly Connect supports with brackets, and attach mounting plates to supports with "B" screws as shown. Align pilot holes in spanner worksurface with holes in mounting plates, and attach with screws as shown. Each mounting plate should be attached to the worksurface(s) with a total of six (6) "A"...
  • Page 14 Conference Top Assembly Assemble support structure as shown on pages 2 thru 4. Place column on floor as shown, and adjust height to approximately match the height of the support structure. Attach mounting plate to support with two (2) "B" screws as shown.
  • Page 15 Conference Top Assembly (cont.) Place worksurface on support structure and column, fitting the support bracket tabs into the large-diameter holes of the worksurface. Align pilot holes in worksurface with mounting holes in support structure, and attach rear of worksurface to support structure with four (4) "A"...
  • Page 16 Mobile Spanner Assembly On a non-abrasive surface (such as a shipping blanket or carpeting) free of screws, tools and other debris that may damage it, flip the worksurface over so its pilot holes are visible. On each straight leg, identify the two (2) holes that will align with the pilot holes in the worksurface.
  • Page 17 Adjustable Height Worksurface Supports Install extended rear glide assembly. Make sure that the upward-bent flanges contact the back of the leg before installing the bolt. For and end-of-run application, attach one bracket to each support with four (4) "B" screws as shown. For a corner or a shared application, attach two (2) brackets to each support using four (4) "B"...
  • Page 18 Adjustable Height Worksurface Supports (cont.) Attach one end of the stretcher to one completed support assembly with four (4) "B" screws, then attach opposite end of stretcher to adjacent support assembly. Use the "10-4" rule when selecting stretchers: The actual length of the stretcher is 10"...
  • Page 19 Adjustable Height Worksurface Supports (cont.) Attach each mounting plate to each support using three (3) "B" screws and two (2) "B" screw for the corner support. Page 19 of 38 939504792 Rev D...
  • Page 20 Adjustable Height Worksurface Supports (cont.) Align pilot holes in the worksurface with the appropriate holes in the mounting plates, and attach with "A" screws as shown. Attach wire managers as shown on page 8. Bottom View of Worksurface HOLE FOR HOLES FOR SUPPORT SCREWS...
  • Page 21 Adjustable Height Conference Link and Conference Wing Assembly Attach support column to worksurface as shown on page 9. Before flipping the worksurface back over, adjust the height of the column to match the height of the support structure. Be sure the adjustment holes face away from the user.
  • Page 22 Adjustable Keyboard Shelf With Details Stella Mechanism On a non-abrasive surface (such as a shipping blanket or carpeting) free of screws, tools, and other debris that may damage it, flip the worksurface over so its pilot holes are visible. Align keyboard mechanism with pilot holes in worksurface, and attach with twelve (12) "A"...
  • Page 23 Positioning Freestanding Units The extended rear glide assembly should just touch the base of the wall. This leaves a space of about 1-1/8" between the wall and the back edge of the worksurface for cable drop. Page 23 of 38 939504792 Rev D...
  • Page 24 Wall Shared Support Extended Corners Tether Bracket 12" 78" needs a 3rd bracket Without a ped Tether Supported Worksurface When the straight leg is used as a shared support, it can be placed in the For extended corners that require a third tether bracket, it should be Application Rules middle of the worksurface to provide increased kneespace.
  • Page 25 Wall Conference Links and wings Corners Tether Bracket 84" or less 72" or less 42"W 42"W 36"W 36"W Straight leg in Tether Supported Worksurface Straight leg halfway back halfway back Application Rules Straight leg can be placed halfway back to support spans between Straight leg can be placed halfway back to support a span attached corner worksurfaces up to 84"W.
  • Page 26 Extended Corners Wall Tether Bracket 126" or less 71"W 48"W Straight leg in Tether Supported Worksurface halfway position Application Rules Straight leg can be placed halfway back to support a span that include extended corner worksurfaces when the span is 126"W or less. Spanners More than 126"...
  • Page 27 See Page 24 L-BRACKET OR "HEAVY-L" STRAP Tether Bracket Assembly and Installation (cont.) MARKS ON STRAP Determine tether bracket locations according to the planning rules and the specific application. Slide the platform bracket over the strap to the desired height, using the marks on the strap as a reference. With the platform bracket on the strap at the desired height, insert the L-bracket between the two to lock them together.
  • Page 28 ® ® Answer Secant Options Worksurfaces Worksurfaces Tether Bracket Assembly and Installation (cont.) STOP TAB Place worksurface on platform as shown, and attach with four (4) "A" screws. Tether brackets DO NOT utilize pilot holes. STOP TAB SPRINGS OUT OF WAY Page 28 of 38 939504792 Rev D...
  • Page 29 PILOT HOLE LOCATIONS Attaching Straight Legs Front Corner Legs a) Front corner legs are attached to the worksurface while it is flipped over, before it is positioned and attached to the tethered system. On a non-abrasive surface (such as a shipping blanket or carpeting) free of 3.0"...
  • Page 30 Attaching Straight Legs (cont.) 3.0" (front) (front) Shared Legs 13.6" a) Shared legs are attached from below while a partner supports the front of the NOTCH worksurface, and tether brackets support the rear of the worksurface. b) Note that the pilot holes in the work- NOTCH surfaces are slightly eccentric (off center) (rear)
  • Page 31 Final Assembly A tie strap must be attached 1.0" in from the front edge of the worksurface whenever an inset shared leg is used. Tie straps do not ORIGINAL utilize pilot holes. (front) POSITION Since all caps and spanners require a front 13.6"...
  • Page 32 Tethered System Assembly Assemble tether brackets as shown on page 27 in appropriate positions, measuring as necessary. For any continuously connected system of worksurfaces, all tether brackets must be adjusted to the same height relative to the panel frames, not relative to the floor. Use the marks on the strap as a visual guide.
  • Page 33 Tethered System Assembly (cont.) While the 2nd person is still supporting the 13.6" front of the worksurface, attach shared legs 24" 30" 13.6" in their proper positions as shown on page 30. The other halves of the leg mounting plates will stick out from under the worksurface, but the worksurface will stand on its own at this point.
  • Page 34 Tethered Cap Assembly For all caps and spanners, the adjoining worksurfaces must have front shared legs as shown. With the help of another person, hold the ORIGINAL POSITION cap in position over the front shared legs and attach with screws. (See caution on page 32.) POSITION Attach stealth plates as shown.
  • Page 35 STRAIGHT LEG MOUNTING PLATE PILOT HOLE Tethered Spanner Assembly On a non-abrasive surface (such as a shipping blanket or carpeting) free of screws, tools and other debris that may damage it, flip the worksurface over so its pilot holes are visible. PRESS NOTE: On each straight leg, identify the two (2)
  • Page 36 42" Tethered Conference Approx. Corner Assembly Position column relative to tethered system as shown. Adjust height of column to approx- imately match the height of the tether bracket platforms. DOWN Follow the procedure shown on page 15, attaching the top to the tether bracket platforms with "A"...
  • Page 37 PILOT HOLE Tethered Conference Link and Conference Wing Assembly On a non-abrasive surface (such as a shipping blanket or carpeting) free of screws, tools and other debris that may damage it, flip the worksurface over so its pilot holes Notch are visible.
  • Page 38 Tethered Conference Link and Conference Wing Assembly (cont.) Position the worksurface on the tether bracket platforms, and attach with "A" screws. Using a level, fine-adjust the height of the leg by turning the glide. Raise Lower Page 38 of 38 939504792 Rev D...