Advertisement
FIG 50
FIG 52
FIG 54
IMPORTANT: The top deck MUST be centered on the rear of the vehicle for the
NOTICE
windows to fit properly.
Step 7: Installing the Quarter and rear Win-
dows to the top Deck
To ensure the top is centered on the vehicle you
will be installing the two quarter windows and the
rear window to the top deck and to each other
before securing it to the vehicle body.
Pro-Install TIP: To make this as easy as possible,
you may have to release the front windshield hea-
der (release but not un-hook) and loosen the rear
corner straps installed in step 4. This will allow
you to line up all window zippers and attachments.
The rear corner straps and header will need to be
re-tightened/clamped before using the top.
Locate the drivers rear quarter window. Line up
and slide the rear quarter window into the "C"
Channel as shown
FIG 55
FIG 51
FIG 53
NOTE:
Do not completely tighten these straps yet.
They should be holding the top but not pulled as
tight as possible. You will do final "tightening" after
you install the windows.
in FIGs 55, 56 & 57. Repeat this on the passenger
side of the vehicle.
Locate the rear window and line up and slide the
rear window into the "C" Channel located at the
top of the rear portion of the top deck (FIGs 58,
59 & 60).
Once both quarter windows are secured to the top
deck, line up the driver's side rear zipper on the
Quarter window to the zipper on the rear window
and zip it down a few inches (FIG 61).
Repeat this on the passenger side of the rear
window. You may have to lift the quarter window
up to secure this second zipper. Once both side
zippers are secure, zip the rear window zippers
down about half way (Fig 62). You will close these
zippers completely at the end of the install.
FIG 56
8
Advertisement
