Answering Calls - AT&T Merlin Legend 10BS User Manual

Quick Start

Answering Calls

Your phone alerts you to an incoming call in several ways.
The phone can ring or you can receive a voice-announced
call over the speakerphone. If you are using your phone, you
may hear a Call Waiting signal (a beep) during your call. This
beep indicates that you have another call. See "Call Waiting"
in Chapter 5.
On the BIS phones, you can prevent voice-announced calls
by turning off Voice Announce or prevent both voice-
announced and internal ringing calls by using Do Not Disturb.
See "Do Not Disturb" and "Voice Announce" in Chapter 5.
You can make a voice-announced call to an MLC-5 cordless
phone. However, the call is received as a ringing call.
To Answer Voice-Announced Calls
Answer a voice-announced call in one of the following ways:
Lift the handset.
Press Microphone to talk over your speakerphone.
Use HFAI.
HFAl must be on before the call comes in. To answer a call, simply
talk directly into the speakerphone.
Answering Calls
2 - 9