Dedicated Feature Buttons - AT&T Merlin Legend 10BS User Manual

Your Analog Multiline Telephone

Dedicated Feature Buttons

Imprinted (dedicated) feature buttons are located directly
above and below the dialpad.
BIS Phones
On BIS phones, four of the dedicated feature buttons —
Message, HFAI, Microphone, and Speakerphone — have a
light next to them to indicate on or off.
Confer-
Press to add another person to a call for
ence
conferencing with up to five people.
Press Drop and a line button to disconnect a
Drop
person from a conference call.
HFAI
Press to respond to voice-announced calls without
lifting the handset or using the speakerphone. You
must press HFAI (Hands Free Answer on Intercom)
button and leave it on; you cannot press it to
respond to a call after the call comes in.
Hold
Press to put a call on hold. The green light next to
the line button with the call on hold flashes until the
call is resumed or the person hangs up. As a
reminder, the phone beeps once every 60 seconds.
(The interval may vary depending on how your
system is administered. ) More than one call at a
time can be put on hold.
1-18
Dedicated Feature Buttons