AT&T Merlin Legend 10BS User Manual page 113

Features
To Program a Posted Message Button
1. Label the button to be programmed as
Posted Message.
2. Slide the T/P switch to P.
3. Press the button you labeled Posted Message.
4. Dial
5. Slide the T/P switch to the center position.
To Use Do Not Disturb
1. To turn on Do Not Disturb, press the programmed
Do Not Disturb button.
The green light next to the button goes on. The green light next to
the programmed Posted Message button also goes on, lndicating
that the Do Not Disturb message is posted.
2. To turn off Do Not Disturb, press the programmed
Do Not Disturb button again.
The green light next to the button goes off. The green light next to
the programmed Posted Message button also goes off, and the
Not Disturb message is canceled.
D
O
5-36
Do Not Disturb
751.