AT&T Merlin Legend 10BS User Manual page 109

Features
Receiving Calls Sent to Coverage
If you provide Individual Coverage, you must program an
Individual Coverage button (either primary Or secondary) for
each person whose calls you cover. If you provide Group
Coverage, you must program at least one Group Coverage
button for each group whose calls you cover. To handle more
than one call at a time for a particular group, you can program
more than one Group Coverage button for that group.
You can program a total of eight Coverage buttons on your
phone, and they can be any combination of Individual and
Group Coverage.
To Program an Individual
Coverage Button
1. Label the button to be programmed as
Coverage — (name).
2.
Slide the T/P switch to P.
Press the button you labeled Coverage — (name).
3.
4.
Do one of the following:
Dial the extension of the phone you want to cover.
5.
6. Slide the T/P switch to the center position.
5-32
Coverage
Dial 40 to program Primary Coverage.
Dial 41 to program Secondary Coverage.