AT&T Merlin Legend 10BS User Manual page 164

Features
NOTE:
You must have an available SA or ICOM button to
transfer a call using an Auto Dial button. When
you press an Auto Dial button to transfer a call,
the system automatically selects an SA or ICOM
button for the transfer.
If an SA Voice or ICOM Voice button is selected
for a transfer with consultation, the transfer is
called a voice-announced transfer. The person to
whom you are transferring will hear your voice on
his or her speakerphone after a beep.
To Transfer to an Inside Extension
without Using One-Touch Transfer
Whether or not your system is programmed for One-Touch
Transfer, you can transfer an inside or outside call to an inside
extension as follows:
1. If your phone has Auto Dial buttons, check the light
next to the button for the person's extension.
2. Press Transfer.
The call is put on hold automatically and the system selects an SA or
ICOM button.
3. Press the Auto Dial button or dial the person's
extension.
If the light is on, the person is unavailable.
See "Handling an Unsuccessful Transfer" in this section.
If the light is off, go to Step 2.
5 - 8 7
Transfer