AT&T Merlin Legend 10BS User Manual page 110

Features
To Program a Group Coverage Button
1. Label the button to be programmed as
Group Coverage — (name).
2. Slide the T/P switch to P.
Press the button you labeled
3.
Group Coverage — (name).
4.
Dial
Dial the group number.
5.
Your system manager must provide this number.
6. Slide the T/P switch to the center position.
To Cover Calls for an Individual or a
Group
1. When a call rings on the programmed Individual
Coverage or Group Coverage button, if the red light is
not already on next to this button, press the button.
2. Lift the handset or press Speaker.
42.
5 - 3 3
Coverage