AT&T Merlin Legend 10BS User Manual page 124

Features
To Program a Leave Message Button
1. Label the button to be programmed as
Leave Message.
2. Slide the T/P switch to P.
3. Press the button you labeled Leave Message.
4. Dial
5. Slide the T/P switch to the center position.
To Leave a Message on
a Display Phone when Calling
1. When you reach a busy or unanswered extension, do
one of the following:
You continue to hear a busy signal or ringing, but your co-worker's
Message light goes on and the message is recorded. If the person
has a full message box or does not have a display phone, you hear a
single beep or, if you have a display phoe, you see the message
Cannot Send.
25.
Press the programmed Leave Message button.
Press the programmed Feature button and
dial 2 5 .
5-47
Messaging