Manual Signaling - AT&T Merlin 1030 User Manual

MANUAL SIGNALING

Use the Manual Signaling feature to generate a beep at a co-
worker's voice terminal. Assign a Manual Signaling button to
each person you want to signal.
To program: T/P to P Touch the button Dial * 6
+ an intercom number T/P to center
To signal a co-worker:
Without lifting your handset, touch a Manual Signaling
button.
You can also touch a Manual Signaling button to signal some-
one while you have an outside call in progress. If you program
this feature on a button with lights, the green light next to the
button goes on when your co-worker uses his or her voice ter-
minal or uses the Do Not Disturb feature.
+
Signal Mary
28