Last Number Redial; Manual Signaling - AT&T Merlin 1030 User Manual

LAST NUMBER REDIAL

Use the Last Number Redial feature to redial the number you
dialed most recently. (The number cannot contain a pause, a
stop, a Touch-Tone enable, or a switchhook flash.) If you have
a 34-button voice-terminal, you can follow the programming in-
structions below to program this feature onto a button. If you
have a 5- or 10-button voice terminal, you can dial a code to use
this feature and save a button for another use.
To program: T/P to P Touch the button Dial *73
T/P to center
If you program a Last Number button, you can redial the number
you most recently called with the touch of a button:
Lift your handset.
Touch Last Number.
Using a Dial Code (5- and 10-button voice terminals only)
To redial a number using the Last Number Redial code:
Lift your handset.
Dial #24.

MANUAL SIGNALING

Use the Manual Signaling feature to generate a beep at a
coworker's voice terminal. Assign a Manual Signaling button to
each person you want to signal.
To program: T/P to P Touch the button Dial * 6
+ an intercom number T/P to center
Last Number
+
+
#24
25