Line Request - AT&T Merlin 1030 User Manual

To place an outside call using ARS:
Touch a Pool Access button.
This signals ARS to expect an outside call.
Lift your handset.
Dial the outside telephone number you want.
You hear beeps instead of Touch-Tones or rotary clicks as you dial.
Wait a few moments.
If you hear a faster busy signal than normal:
Touch the same Pool Access button you used to begin your
call.
If you hear a fast MERLIN system busy signal:
Hang up and redial in a few moments using the Pool Ac-
cess procedure or the Saved Number Redial feature (see
page 26).
NOTE: For ARS to work, you must dial a "1" before dialing a
long distance number, even if you do not normally do so.

Line Request

If you are waiting to use a line that is busy, you can have the
MERLIN system signal you when the line is free:
Without lifting your handset, touch the button for the busy
line.
The red light next to the button goes on.
When you hear the voice terminal ring briefly, indicating
the line is available, lift your handset.
You cancel your Line Request when you touch another line but-
ton or when you receive or place another call.
Pool Access
+
555-1234
+
+
outside
number
7