Table of Contents
Advertisement
6.3.4 EDID Setting
Click EDID Setting to enter the below section to set a predefined EDID for input ports
Select a built-in EDID for one or several input ports.
Operation:
1.
Select a built-in EDID
2.
Select one or several input ports. Press ALL to select all input ports
3.
Click Confirm to save setting
Upload user-defined EDID by the below steps:
1.
Prepare the EDID file (.bin) on the control PC.
2.
Select the User-defined
3.
Click the box
4.
Click Apply to upload the user-defined EDID, and then click Confirm to save setting
and then select the EDID file (.bin) according the tooltip
800.626.6445
21
Advertisement
Table of Contents
