Subscribe to Our Youtube Channel
Related Manuals for Vanco Evolution EVSW21MV
Summary of Contents for Vanco Evolution EVSW21MV
- Page 1 HDMI® S W I T C H with Multiview and PIP Vanco Part Number: EVSW21MV 2x1 HDMI® Switch with Multiview and Picture-in-Picture www.vanco1.com • 800.626.6445...
- Page 2 DEAR CUSTOMER Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. This product is 100% inspected and tested in the United States to verify HDMI performance parameters.
- Page 3 INTRODUCTION The Evolution by Vanco EVSW21MV 2x1 HDMI Switch with Multiview and PIP allows for two sources to be connected and be viewed one at a time like a standard switcher, or allows for Multiview. Tired of switching channels back and forth?
-
Page 4: Specifications
SPECIFICATIONS Video Bandwidth ............225MHz[6.75Gbps] Input Ports ..............2 × HDMI (Female type) Output Ports ............. 1 × HDMI (Female type), Audio output .............. PCM, 5.1, 7.1CH, Dolby 5.1, DTS5.1 Input Resolution ............480i60Hz,480p60Hz,576i50Hz,576p50Hz,720p50/ 60Hz, 1080i50/60Hz,1080p24/30/50/60Hz,800x600@60,1024x768@60,1280x720@60,1920x1080@60 Output Resolution ............1080p, 720p, 1080i,1024x768,1360x768 ESD Protection ............ -
Page 5: Panel Descriptions
PANEL DESCRIPTIONS 1. POWER LED: Illuminates when the switcher is connected to power 2. OUTPUT LED: Illuminates when a display is connected and is powered on 3. IN 1 LED: Illuminates when the source connected to “IN 1” is selected as the main source 4. - Page 6 MODES OF OPERATION REMOTE CONTROL 1. Power Button 2. IN1: Selects Input 1 as the main source 3. IN2: Selects Input 2 as the main source 4. SIZE: Adjusts the size of the PIP tile (in PIP mode only) 5. POSITION: Adjusts the position of the PIP tile (in PIP mode only) 6.
-
Page 7: Connection Diagram
CONNECTION DIAGRAM CONNECT AND OPERATE 1. Connect sources such as a Blu-Ray Player, game console, A/V Receiver, Cable or Satellite Receiver, etc. to the HDMI inputs (IN 1 and IN 2) 2. Connect a display such as an HDTV or HD Projector to the HDMI output (OUT) 3. -
Page 8: Software User Interface
7. FIRMWARE UPDATE: While connected and with the switcher turned on, locate the appropriate .bin file (Vanco will provide any f/w updates to the product page on www.vanco1.com) that is saved to your PC. Use “Open” to locate the file, then click on “Upgrade” to perform update. -
Page 9: Troubleshooting
HDMI cables disconnected, turn on the source and plug in the HDMI cable into it’s output, then power up the Vanco unit and plug the HDMI cable into it’s input, finally turn on the display and plug the HDMI cable from the receiver into it. -
Page 10: Limited Warranty
If repairs are needed during the warranty period the purchaser will be required to provide a sales receipt/sales invoice or other acceptable proof of purchase to the seller of this equipment. The seller will then contact Vanco regarding warranty repair or replacement. -
Page 11: Liability Statement
LIABILITY STATEMENT Every effort has been made to ensure that this product is free of defects. The manufacturer of this product cannot be held liable for the use of this hardware or any direct or indirect consequential damages arising from its use. It is the responsibility of the user and installer of the hardware to check that it is suitable for their requirements and that it is installed correctly. - Page 12 ® Vanco International 506 Kingsland Drive Batavia, Illinois 60510 call: 800.626.6445 fax: 630.879.9189 visit: www.vanco1.com...
Need help?
Do you have a question about the Evolution EVSW21MV and is the answer not in the manual?
Questions and answers